Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts

$62.00
Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm - Finish: Matte Black with White Accents
$51.00
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 35a is a 35° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35a is a straight 35° bend. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 340mm or 400mm - Outer Diameter: 22.2mm - Construction: 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing - Weight: 200g/pair
$91.00
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
$91.00
Flip-up armrest leaving the base or drop bar clear for riding with your hands on the flat section of the handlebar. - Construction: 6061-T6 Forged Aluminum - Stack Height: 24mm - Width Adjustment: 37mm - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 242g
$91.00
The DRV/AEROa is a high-performance aluminum aero drop bar featuring a truncated airfoil for aerodynamics, comfort and stiffness. The curve has been optimized for modern road levers. The innovative fit and ergonomics of the DRV system include a 7° ramp angle and a 4° flare in the drops, allowing a natural wrist angle for enhanced comfort and control. The DRiVe metric by Profile Design pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. What is your DRiVe? Gone are the days of simply measuring a drop bar by the standard reach, drop and width. Our DRiVe metric pinpoints the precise position in the drops where riders instinctively place their hands. The metric is incorporated into a new series of progressively sized handlebars designed around a cyclist's most powerful hand positions. - The DRiVe Metric: The DRiVe (Drop Reach Variant) position is measured via a 73° line beginning at the bar bore. The DRiVe metric pinpoints the line intersection with the drop. - DRiVe Reclaims Comfort, Power & Control: Modern drop bar designs are deeply tied to tradition. They are designed based on outdated road bike sizing rendering many of cycling intended hand positions unattainable when riding modern frame geometry. The ride positions that are the most powerful and allow for the most control have now shifted into virtually unattainable positions. DRiVe reclaims many of the ideal positions most critical to comfort, power, and control. - Fit Made Simple: To predict the DRiVe position of any given rider, we looked at an anthropological study focusing on the correlation among handbreadth, shoulder width, and height. By measuring your handbreadth we can easily identify a DRiVe that will be compatible with your body type. - Progressive Ergonomics: The tops and hoods complement the powerhouse DRiVe position and the Reach and DRiVe are progressively sized as the bar increases in width. This progressive sizing ensures the most powerful positions remain right where they are needed. - Weight: 315g (38cm) - Size: 36, 38, 40, 42, 44cm (center to center) - Reach: 70, 75, 80mm - Clamp Width: 100mm - Clamp Diameter: 31.8mm - Clip Compatible: Yes - Drop: 122mm, 136mm, 148mm - Drop Outsweep: 4° - Drive: 105mm, 120mm, 135mm - Internal Cable Routing: Yes (Mechanical / Di2) - Max Brake Lever Torque: 10Nm - Max Torque Clamping to Bar: 6Nm - Material: 6061-T6 AL
$51.00
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 4525a is a 45° / 25° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the rider's hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - The 4525a extensions have a first section at 45° and the grip at 25°. The rider can choose whether to hold high for the shrugged position or low for a more open, head up position. - The 4525a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. Origin - Recent Trends in aerobar fit have been towards higher hand positions, so we've increased the rise compared to previous generation extensions. We have focused on the most popular angles from our previous range and added the 45/25a as a multi position option. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So it can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 400mm - Outer Diameter: 22.2mm - Construction: 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing - Weight: 200g/pair
$51.00
The Ergo is the core of our new family of fit and comfort focused armrests. It offers a smoothly curved shape designed to comfortably cup the elbows while providing good support and control. The bolt pattern yields 48 possible configurations just by moving the armrest. The Ergo is compatible with all current aerobars and earlier models that used the F-19, F-22, F-35 or F-40 armrests. - Armrest Construction: Injected Nylon/Glass Fiber - Pad Construction: EVA foam with anti-bacterial/anti-microbial Lycra cover - Pad Model: 10mm - Color: Matte Black - Hardware: M6 x 10 FHB - Weight: 145g/pair
$91.00
The forged aluminum bracket offers solid, easy-to-use construction alongside an industry-leading fit range. It is also compatible with our riser kits. The bracket is designed for 31.8mm bars and 22.2mm extensions in aluminum or carbon. - Materials: Forged 6061-T6 AL - Stack Height: 42.6mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 234g
$51.00
The new range of extensions have evolved from our well proven T-Series. They have been designed to offer distinct fit options. We have also adopted a new naming system whereby the name gives the angle material of the extension. Thus 50a is a 50° bend in aluminum. Performance - The sole purpose of extensions is to provide a comfortable position for the riders hands relative to the armrests. They enhance performance by allowing the rider to relax into their optimal position. Which is why we provide different fit options so each rider can chase their best performance. Fit Data - Extension Shape: A 50a extensions offer a 50° ski bend shape. - The 50a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. Origin Recent Trends in aerobar fit have been towards higher hand positions, so we've increased the rise compared to previous generation extensions. We have focused on the most popular angles from our previous range and added the 50a as a multi position option. Tech Guide - All the extensions have a 22.2mm diameter in the clamping area. - They are designed for cables to be routed out the rear of the extensions so do not have cable exit holes. Who is it for? - The extensions will fit in any aerobar that is designed for 22.2mm. So can be used by any rider wishing to improve the comfort of their aerobar grips. - Length: 400mm - Outer Diameter: 22.2mm - Construction: 6061-T6 aluminum, pre-drilled for bar-end shifter cable routing - Weight: 200g/pair
Page 1 of 1