Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other

$29.99 - $43.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap

$59.99
The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.

$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip.
Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

$9.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

$59.00
The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system.
- Thread Length: 9mm
- Thread Pitch: 15 x 1.5mm

$49.99
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side.
- Hinged clamps for easy installation without removing other components
- AL-6061, anodized black
- 23 grams
- For use only with I-Spec II compatible shifters or dropper lever

$20.00
- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains
- DLC Coated
- Non-reusable
- Opening Tool Required
- Card of 2 pairs

$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.

$30.00
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.

$10.00
One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.

$20.00
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.

$50.00
Turn your geared bike into a singlespeed machine with Surly's Singleator. The Singleator mounts to your derailleur hanger and provides a smooth, quiet and adjustable means of tensioning the excess chain slack on any bike. It's made from strong forged steel and features a triple-sealed spring, large-cog capacity, chain guides, fully-adjustable chain line, floating pulley, and a stainless-steel pivot bushing. And, it works with both BMX and standard chains.

$379.00
SRAM's 1x Eagle component system boasts a twelve-speed cassette. We built pulleys that can handle the load better than stock. These CeramicSpeed Pulley Wheels work with less drag, adding to the power transmitted to the rear wheel while offering greater durability, going longer between replacement intervals.
These pulleys are also fully compatible with the SRAM Eagle AXS derailleur.
The aluminum pulleys with standard bearings are 34.4% more efficient than stock and use our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The upper and lower pulleys both have a narrow-wide tooth design with 14 teeth each. As the upper and lower pulleys have different tasks, they have different shapes. You'll find they are thus marked, and have directional arrows.
These pulleys should be installed with stock SRAM pulley spacers. Save those from your old pulleys before installing CeramicSpeed.
The kits come with CeramicSpeed Oil in a 15ml dropper bottle and grease in 5ml syringe. The bearings come pre-oiled. The grease can be used on the pulley bearings when riding in particularly harsh environments.
In the box:
- 2 x 14-tooth pulley wheels
- CeramicSpeed Bearing Oil in 15ml dropper bottle
- CeramicSpeed Grease in 5ml syringe
- Sticker sheet

$25.99
- Refresh your Tellis post with the Fuel colorway collar
- Kit includes new seal, keyways and bushings
- For 30.9 and 31.6 Tellis posts

$4.49 - $44.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

$64.99
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel.
- KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner
- Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes
- 20 black alloy lined end caps, 10 black POP end caps included

$19.99
- Deluxe molded replacement pads fit all armrest Vision aero bars
- Molded replacement pads fit the Vision Mini TT clip-ons
- Dual density foam for maximum comfort
- Non-slip textured top

$8.99 - $12.50
The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.

$15.00
Snap-on brake cable guides for bikes that don't have any.
- Steel cable housing guide for 1-1/8" top tubes
- Snaps on; no bolts
- Set of 3 clamps

$10.19
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

$29.95 - $44.99
Problem Solvers' MisMatch Adapters allow you to combine your Shimano and SRAM shifters and brakes onto a single clamp for a more ergonomic, less-cluttered handlebar. These CNC-machined aluminum adapters work with Shimano I-Spec and SRAM MatchMaker components to fasten your preferred combination on to a single, existing bar clamp.

$13.59
Origin-8's Braze-On Cable Stop with adjuster allows you to convert to STI style shifters. They mount onto down tube Braze-on bosses and are machined alloy with an anodized finish. The lightweight design lets you make the conversion without adding too much extra weight. One pair per package.

$25.00 - $29.00
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer.
Top caps are compatible with all 1-1/8" aluminum steerer tubes.
The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.
KIT INCLUDES
- EDC TOP CAP
- EDC steerer plug
- 2x 1mm, 3mm, & 5mm Headset Spacers

$16.50
COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES
- CHAIN GUIDE - ISCG05 - V2
- BASH GUIDE - ISCG05 - V2
- E-BIKE - STEPS/EP8
- Kit includes 1 two piece top guide

$41.00
Hose fittings fit many of SRAM's newest hydraulic brake models.
- Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench
- Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
Page 1 of 53
Next page