Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Sunlite Rim Grommet
$0.99
- Converts Schrader rims to Presta - Rubber - Sold individually
Sunlite BB Axle Nut
$2.00
- Shell: 8mm flanged axle nut - Flanged
Sunlite Quick Release Skewer (Front, 100mm)
$5.99
• Replacement steel quick release skewers
Sunlite Replacement QR Skewer
$5.99
- Replacement rear skewer - Spacing: 135mm - Material: Steel
Sunlite Three Speed Sturmey Archer Indicator Spindle
$5.99
Replacement indicator chain for three speed Sturmey Archer hubs.
Mavic Universal Wheel Magnet
$7.90
- Cyclocomputer wheel magnet - Fits most bicycle spokes - For Tracomp carbon spokes found on Mavic wheels, see Tracomp Spoke Removeable Magnet (each sold separately)
Sunlite Quick Release Skewer (Front, 133mm)
$7.99
• Replacement aluminum quick release skewers
Sunlite Quick Release Skewer (Rear, 161mm)
$7.99
• Replacement aluminum quick release skewers
Mavic UST Rounded Valve
$9.90
- UST compliant tubeless valve with removable valve core for easy sealant installation. - Mavic recommends that UST valves must be changed once a year to ensure the sealing of the UST systems. Two versions are available: - Round stem compatible with 2012 and beyond Crossmax SLR, ST and SX and 2013 Crosstrail, and: -Square stem for older wheel versions
Stan's NoTubes Rim Tape
$11.99 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
WTB TCS Rim Tape
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
WTB TCS Brass 34mm Valve Stems
$15.99
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
Stan's NoTubes Tubeless Valve Stems
$18.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Sunlite Lightnin' Skewer
$19.99
• Locking skewer set • Cro-Mo • 70g (set)
Stan's NoTubes Neo Front Hub End Caps
$20.00 - $21.00
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
Zipp Decal Set
$20.00
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
Stan's NoTubes Cyclocross Rim Strip
$22.50
Stan's Cyclocross Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Shimano Ultegra Hubs
$58.99 - $108.99
Shimano's Ultegra Hubs are flag-bearers for high-durability, smooth-rolling performance. Hardened steel cup-and-cone design use stainless steel bearings for minimal drag and superior ease of maintenance. Shimano's Digital Adjustment System makes hub maintenance fast, simple, and reduces axial force on the bearings, reducing wear and tear on the hub internals.
Quality Wheels Shimano Tiagra RS400 / Alex DA22 700c Front
$101.99 - $105.00
Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.
Stan's NoTubes Avion Team Wheelsets
$1,575.00
Offering decreased rolling resistance on paved roads, unbeatable comfort on gravel, and a weight barely over 1610g, the Avion Carbon Disc is the future of performance road wheelsets. The Avion's R Series Bead Socket Technology is designed for tubeless-specific road tires, traditional clincher tires when used with tubes, and wider gravel and cyclocross tires. The 28mm WideRight rim profile of the Avion increases tire volume and decreases pressure for less rolling resistance, superior traction, and more comfort. Featuring our vibration damping Radial Impact Absorbing Carbon Technology (RiACT) and built around the reliability and quick engagement of our new Neo, the Avion offers performance that doesn't stop when the pavement ends. Avion wheels come with yellow tape and 55mm tubeless valves installed. Front wheels ship with 15x100mm TA end caps installed, but also include 12x100mm TA and QR end caps and skewers. Rear wheels ship with 12x142mm TA end caps installed, but also include QR end caps and skewers. Also inside the box you'll find replacement spokes, small parts bag, and a final QC readout for your unique wheelset. - Designed for Disc Brake Road, Gravel, and Cyclocross - 41mm deep aerodynamic RiACT rims absorb impacts and roll faster - New faster engaging, 100% CNC machined Neo hubs - BST-R series for tubeless road, traditional road with tube, and wider tires - 28mm WideRight rim design optimized for 25mm-40mm tires - Sapim spokes with Secure Lock aluminum nipples - 2-year warranty with 3-year crash replacement
Page 1 of 1