Holds stainless steel stay rods to fender Contains: - (1) Eyelet bolt - (1) 10mm lock nut - (1) Rubber cap Compatibility: - All Hardcore, SpeedEZ, Cascadia, Cascadia ALX, & Grasshopper fenders

The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Planet Bike fenders: - 35mm Width: 700c x 35mm Fenders (Hardcore) - 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent) - 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)

Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)

- Plastic nylon molded body - Chromoly spindle - 318g pair

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6

•Steel •Chrome Plated •Front or Rear •Cruiser •26-inch x 75mm

Giant's Numen TL1 5 LED Taillight boasts 5 bright LEDs so you get noticed out on the road. If that wasn't enough, you have 4 modes: steady, flashing, patrol, and random modes for high visibility in traffic. And it runs for up to 180 hours. This great water-resistant light also sports 2 mounting options.

- Rubber straps - Fit Raceblade, Mud-x - Set of 8

- One-piece ABS resin body - Molded pins - 320g pair

Giant's Numen Mini Headlight is small, powerful, and surprisingly bright. It's so light, you can just leave it on your bars and you'll barely notice it, while drivers will notice its 2 bright LEDs as they illuminate your way. This nice light has a flexible rubber mount so you can attach it almost anywhere on your bike. It has steady and flashing modes and runs up to 100 hours on its included batteries.

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.

• 2 bright Nichia LEDs • Uses 2 CR 2032 lithium batteries (included) • 100 hour run time • 3 modes: 2 flashing and 1 steady • Water-resistant silicone body

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

- High impact Resin multi-use body with integrated cage - Externally sealed ball bearing system - 100mm x 82mm platform - Weight: 316g pair (9/16")

- 8 lumen, single LED safety light - 2 modes - solid and flashing - Up to 110 hour run time with 2 CR2032 batteries (included) - Multi-fit rubber strap attachment

- 20-lumen COB chip LED tail light - Powered by 2 AAA batteries (included) - Can be installed horizontally or vertically - IPX3 water-resistant rating

Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.

Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)

The Cascadia Fender Hardware Kits are compatible with Cascadia fenders, Hardcore fenders, and Full fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers - Disc adaptor spacers (60mm & 65mm widths only) Specific compatibility w/Planet Bike Fenders: - 35mm Width: 700c x 35mm Fenders (Cascadia & Hardcore) - 45mm Width: 700c x 45mm Fenders (Cascadia, Hardcore, and Full) - 60mm Width: 26-inch x 60mm Fenders (Cascadia & Hardcore) - 65mm Width: 29-inch x 65mm (Cascadia)

Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.

X-Long Mudflap/Spoiler can be retrofitted to any fender profile of the correct size. A hole may need to be drilled in the profile if one isn't already there. - Adds 6 inches of coverage to any fender profile - 35mm size fits fender profiles up to 35mm - 53mm size fits fender profiles 46mm-55mm

The X-Long Spoiler is designed to add extra coverage to SKS fenders. - Compatible with 45mm versions of the Chromoplastic, Commuter II, Long Board and Raceblade fender models - Easily mounted by consumer with included hardware - Sold as Each

Sigma Rear Brake light. A simple little light with a big purpose — safety. Just clip this light on your rear brake cable and it will help alert anyone behind you that you are slowing down. Perfect for kids, commuters, and group rides! Fits U-brakes, V-brakes, canti's, road calipers, mechanical disc brakes, but won't fit hydraulics. Functions: - LED brake light with replaceable CR 1025 button cell battery (included) - Clearly visible, red brake LED during use - Burn time: approx. 200 hours continuous light, average of approx. 100,000 braking processes - Attaches to the rear brake cable using a 2.5 mm hex wrench (not included) - Quick and simple attachment - Attaches to cable actuated mechanical brakes (25 mm clearance) - Rounded brass screw to protect the brake cable - Five different colors are available to match any bike. - Robust, water-resistant housing - Weight: 7 g

Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.

- One-piece resin body - Juvenile size platform - Boron spindle - 390g pair

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included

- 32 lumen single LED safety light - 2 modes - steady and flashing - 2 CR2032 batteries included - Water resistant design

Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.

Features - Compatible with common wheel and tire sizes - Helps keep the back side of suspension fork bridges clean - Multi-color Giant logo sticker pack included

Serfas’ TL-415 Rear Flasher provides visibility and simplicity. Its three red LEDs can be seen from 500 yards in either the steady or flash mode. Plus, this flasher has an extended burn time so you can leave it on your bike for dependable visibility.

- Attaches to saddle rails - Quick and easy to install and remove - Fat Butt, a wider version for fatbike applications - Road/CX narrower for road and cross bike applications

- One-piece resin body and cage - Toe-clip compatible

The TL 5.0 SL has five ultra bright LED’s with four different operating modes, including three different flash modes. New for 2015, the amber Side Lights help to provide even more visibility from the sides of the rider. The TL 5.0 SL will help keep you safe and seen from behind (180 degree visibility). The TL 5.0 SL operates on 2 AAA batteries (included) for up to 100 hours on flash. - 5 Ultra Bright LEDs - A wearable safety light – clip onto various straps, belt loops, etc. - 100 hours run time - Budget-friendly quality light - Eye catching flash mode patterns - 4 operating modes - Runs on AAA batteries - FL 1 Standard IP64, water resistant WARRANTY The TL 5.0 SL is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seatpost Mount - 2 AAA Batteries

- Keeps you clean and dry on wet roads and trails - Attaches quickly to saddle rails without tools - Stores easily in a backpack - Wheel Size: Universal Standard: Fender Size: 380mm x 102mm Weight: 19g Wide: Fender Size: 383mm x 115.5mm Weight: 25.5g

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.

- Simplistic safety light combo pack designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - Both lights feature 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries each

- Single super bright LED safety light - USB rechargeable - cable included - Low battery indicator - Short 2.5-3 hour charge time with indicator light - Quick and easy to use silicone band attachment - 2 modes - Steady and flash - Lumens: 35

- Single super bright LED safety light - USB rechargeable - cable included - Low battery indicator - Short 2.5-3 hour charge time with indicator light - Quick and easy to use silicone band attachment - 2 modes - Steady and flash - Lumens: 8

Small, compact, bright, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Battery type: CR2032 x2 - Mount size: ~22-32mm Modes/Run Time - Constant: 50 hours - Rapid flashing: 100 hours - Slow flashing: 100 hours

Small, compact, quick and easy - there's no reason not to grab a Cateye ORB for your next ride. The ORB pairs a sleek, compact design housed in an alloy chassis. Conveniently, the lens itself serves as the light’s operating switch and is protected from inadvertent triggers due to the housing’s design while still allowing for side visibility. The ORB is available in front and rear versions and both feature 3 separate operating modes. Installation is quick and easy thanks to the heavy-duty rubber mounting strap and the rear version features an angled mount for seat post use. - Simple, lightweight and compact safety set perfect for kids and adults seeking a little more visibility - Easy installation and push button operation - Universal mounting strap easily attaches to bars from 22mm to 32mm - Side cut outs provide visibility from a wide angle for additional safety - Powered by two CR2032 cells

Small, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Battery type: CR2032 x2 - Mount size: ~22-32mm Modes/Run Time - Constant: 50 hours - Rapid flashing: 100 hours - Slow flashing: 100 hours

Keep the crud off your frame with the Fox Mud Guard. Designed to fit multiple fork and wheel sizes, the Mud Guard is an essential accessory for riding in wet environments. - Universal design fits most current forks

A simple plastic fender that can be used on either the front or rear of the bike with styling to match your ride. - Available in multiple colors - Made in the USA

- Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.

Bicycle frame top-tube mounted storage pack mounts behind the stem. Nylon construction with mesh flap cover. Padded sides help maintain shape no matter the contents. Available in two size options. TECH SPECS - Size: Small: 75mm x 40mm x 105mm (220cm3) or Large: 150mm x 50mm x 90mm (386cm3) - Color: Red, Grey - Weight: Small: 15g, Large: 30g

The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement. - Made in Germany

Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

Others out on the roads and paths will see you when Sunlite's HL-L380 Headlight is on your bike. It sports 3 bright Nichia LEDs, steady and flashing modes, and 200 hours of run time! A quick-release handlebar mount is included, too.

- 2 super bright LEDs per light - Soft yet durable silicon casing - Never worry waterproof design - Universal rubber bracket

Lightweight and stealthy, Muc-Off Ride Guards keeps mud fling to a minimum. - Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England

- Lightest and most versatile MTB mudguard available - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes

Lightest and most versatile MTB mud guard available. - Uses hook and loop Velcro straps to attach to the bridge and lower legs - Compatible with forward and double bridge fork designs and all wheel sizes - XL version is longer and provides more coverage - Reverse version is designed for forks with reversed bridges - Fat Face Fender MV0035 updated to be compatible with FatBike suspension forks - Fat Face Fender XL, you guessed it, extra wide for FatBike applications

Odyssey Twisted PC pedals-extremely simple, lightweight, inexpensive and famously durable plastic-bodied design.Often duplicated but never replicated. - High-strength plastic composite